Drive Plate, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission removed. Refer to TRANSMISSION, REMOVING AND INSTALLING (0B2) (SEDAN) / TRANSMISSION, ASSEMBLY SEQUENCE (0B2) (AWD - CABRIOLET) / TRANSMISSION, DISASSEMBLING AND ASSEMBLING (0B2) (CABRIOLET) / TRANSMISSION, DISASSEMBLING AND ASSEMBLING (0B2) (COUPE) / TRANSMISSION, ASSEMBLY SEQUENCE (0B2) (AWD - COUPE) or TRANSMISSION, REMOVING AND INSTALLING (0AW) (CABRIOLET) / TRANSMISSION, TRANSPORTING (0AW) (CABRIOLET) .
-- Insert the :10-201 to loosen the bolts.
CAUTION:
- When loosening and tightening the bolts, do not damage the drive plate centering flange.
-- Remove the drive plate bolts -1- using an internal multi-point socket with at least a 40 mm shaft length.