Camshaft Adjustment Valve 2 -N208- / Exhaust Camshaft Adjustment Valve 2 -N319-, Removing And Installing, Cylinder Bank 2 (Left): Removing

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

Vehicles with the Engine Codes CGTA/CTFA: 

Fig 1: Identifying Left Air Guide Pipe Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamps -arrows- and remove the left air guide pipe.

Continuation for All Vehicles: 

Fig 2: Identifying Connectors And Mount

Courtesy of AUDI OF AMERICA, LLC

-- Remove the connectors -1- from the mount -2- disconnect them, and then free up the wires.

-- Unclip the mount upward.

-- Remove the bolt -1- and the double bolt -3- and then press the wiring guide -2- slightly upward.

Fig 3: Removing Bolt And Double Bolt And Then Pressing Wiring Guide Slightly Forward

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -2- and free up the wiring harness -arrows-.

Fig 4: Identifying Connectors

Courtesy of AUDI OF AMERICA, LLC

-- Push the wiring harness forward.

-- Remove the affected bolt -1- and then remove the valve.