LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> S8 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 4.0L - Turbocharger & Supercharger - Engine Code(S): CEUA, CGTA, CTFA & CTGA >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, Removing And Installing >> Removing

Charge Air Pressure Sensor -G31-, Removing And Installing: Removing

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

WARNING:

Fire hazards and risk of damage for a faulty engine cover.

  • The engine cover must be always be installed before the hood is closed.
  • The engine may neither be started nor driven without an engine cover.

-- Disconnect the connector -2-.

-- Remove the bolts -1-, and remove the Charge Air Pressure Sensor -G31-.

Fig 1: Identifying Charge Air Pressure Sensor Bolts
GWWA21-10729Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals