LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> S8 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) >> (55 Hood, Lids) >> Rear Lid >> Overview - Rear Lid >> Overview - Rear Lid, Water Drain Channel

Overview - Rear Lid, Water Drain Channel

Fig 1: Overview Of Rear Lid, Water Drain Channel
GWWA55-10612Courtesy of AUDI OF AMERICA, LLC
  1. Right Water Drain Channel
    • Self-adhesive, peel off the protective strip just before installing
    • Remove the front adjusting buffer before removing.
    • Pry off the cover -8-, remove the bolt -9- and remove the water drain channel.
  2. Front Adjusting Buffer
  3. Cover
  4. Internally Threaded Pop Rivet
  5. Stop
    • Install in the rear lid
  6. Rear Lid
  7. Adhesive Tape
    • Peel off the protective film and forcefully press it on the water drain channel.
  8. Cover
  9. Bolt
    • 14 Nm
scientia non olet · About LEMON Manuals