Overview - Rear Final Drive, AUDI A4, A5 Coup E /SPORTBACK/Cabriolet, A6, A7
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Subframe
- Removing and installing. Refer to SUBFRAME .
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Left Drives Axle
- Removing and installing. Refer to DRIVE AXLE .
- Bolt
- 20 Nm
- Heat Shield
- Rear Final Drive
- Removing and installing. Refer to REAR FINAL DRIVE, REMOVING AND INSTALLING, AUDI A4, A5 COUP E /SPORTBACK/CABRIOLET, A6, A7 .
- Additional work after replacing the rear final drive. Refer to REAR FINAL DRIVE, ADDITIONAL WORK AFTER REPLACING .
- Driveshaft
- Removing and installing. Refer to DRIVESHAFT, REMOVING AND INSTALLING FROM REAR FINAL DRIVE .
- Right Drive Axle
- Removing and installing. Refer to DRIVE AXLE .