LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> S7 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L - Engine Assembly - Engine Code(S): CEUC & CRDB >> 10 Engine Assembly >> Subframe Mount >> Engine, Supporting In Installed Position

Engine, Supporting In Installed Position

Special Tools And Workshop Equipment Required 

Procedure

-- Remove the left and right foam block -arrow-.

Fig 1: Identifying Foam Block
GWWA10-11383Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

WARNING:

Fire hazards and risk of damage for a faulty engine cover.

  • The engine cover must be always be installed before the hood is closed.
  • The engine may neither be started nor driven without an engine cover.

-- Position the Engine Support Bridge 10-222A on the left and right suspension strut towers as illustrated.

-- Engage the Engine Support Bridge - Spindle 10-222A/11 in the left and right engine lifting eyes.

-- Lightly pretension engine with spindles.

Fig 2: Identifying Engine Support Bridge
GWWA10-11557Courtesy of AUDI OF AMERICA, LLC

Assembling

Assembly is performed in the reverse order of disassembly, noting the following:

-- Install the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

WARNING:

Fire hazards and risk of damage for a faulty engine cover.

  • The engine cover must be always be installed before the hood is closed.
  • The engine may neither be started nor driven without an engine cover.
scientia non olet · About LEMON Manuals