LED Headlamps Overview
Observe notes on contact corrosion CONTACT CORROSION .
Headlamp Housing, Control Modules
- Screw
- 1.5 Nm
- Quantity 4
- Screw
- 1.5 Nm
- Quantity 3
- Power Output Stage 3 for LED Headlamp
- For daytime running lamp/parking lamp, turn signal
- Left LED headlamp power output module 3 -A33-, right LED headlamp power output module 3 -A29-
- Removing and Installing, refer to RIGHT AND LEFT POWER OUTPUT MODULE 3 -A29- / -A33- .
- Screw
- 1.5 Nm
- Quantity: 2
- Ventilation
- For headlamp housing.
- Headlamp Housing
- Removing and installing, refer to HEADLAMP HOUSING .
- Screw
- 4.5 Nm
- Screw
- 4.5 Nm
- Headlamp Fan 2
- Left headlamp fan 2 -V463-, right headlamp fan 2 -V464-.
- Removing and installing, refer to HEADLAMP FAN 2 -V463- / -V464- .
- Screw
- 2 Nm
- Quantity: 2
- Housing Cover For The Headlamp Fan
- The headlamp housing must be cut open to replace the fan.
- A housing cover can be ordered to seal the assembly opening.
- Removing and installing, refer to HEADLAMP FAN 2 -V463- / -V464- .
- Screw
- 2 Nm
- From the repair kit for the headlamp fan cover.
- Quantity: 3
- Screw
- 2 Nm
- Clip
- For the headlamp cover
- Removing and installing, refer to HEADLAMP HOUSING REPAIR SET, INSTALLING
- Screw
- 6 Nm
- Headlamp Fan
- Left headlamp fan -V407-, right headlamp fan -V408-.
- Removing and installing, refer to HEADLAMP FAN -V407- / -V408- .
- Power Output Stage 2 for LED Headlamp
- For high beam, cornering lamp.
- Left LED headlamp power output module 2 -A32-, right LED headlamp power output module 2 -A28-
- Removing and installing, refer to RIGHT AND LEFT POWER OUTPUT MODULE 2 -A28- / -A32- .
- Power Output Stage 1 For LED Headlamp
- For low beam
- Left LED headlamp power output module 1 -A31-, Right LED headlamp power output module 1 -A27-
- Removing and installing, refer to RIGHT AND LEFT POWER OUTPUT MODULE 1 -A27- / -A31- .
- Screw
- 1.5 Nm
- Quantity: 4