Intake Manifold Assembly: Notes

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Material

Item	Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent	WSS-M2C930-A

Fig 1: Identifying Intake Manifold Assembly With Specifications (1 Of 2)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	W500215-S	Throttle body (TB) bolt (4 required)
2	9F991	TB
3	9E936	TB gasket
4	W503280-S	Lower throttle body spacer bolts (4 required)
5	W503275-S	Upper throttle body spacer bolts (2 required)
6	9A589	Throttle body spacer
7	9L437	Throttle body spacer gasket
8	-	Intake manifold runner control (IMRC) actuator pivot pin C-clip
9	W503917-S	IMRC actuator bolt (3 required)
10	9J559	IMRC actuator

Fig 2: Identifying Intake Manifold Assembly With Specifications (2 Of 2)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
11	W500211	Fuel rail bolt (6 required)
12	9F792	Fuel rail
13	9F907	Fuel injector-to-fuel rail locking clip (10 required)
14	9F798	Fuel injector-to-fuel rail O-ring seal (10 required)
15	9F593	Fuel injector (10 required)
16	9F798	Fuel injector-to-intake manifold O-ring seal (10 required)
17	9Y452	Intake manifold