LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> S6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (Engine - 6.8L (3V) -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Intake Manifold Assembly >> Disassembly

Intake Manifold Assembly: Disassembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 4 bolts and the throttle body (TB).
    • Discard the TB gasket.
  2. Remove the 6 bolts and the TB spacer.
  3. Remove the intake manifold runner control (IMRC) actuator rod C-clip.
  4. Remove the 3 bolts and the IMRC actuator.
    5. NOTE: The fuel rail and fuel injectors are removed as an assembly.
  5. Remove the 6 bolts and the fuel rail assembly.
  6. Remove the fuel injector-to-fuel rail locking clips and separate the fuel injectors from the fuel rail.
    • Discard the 2 O-ring seals from each fuel injector.
scientia non olet · About LEMON Manuals