Installing: Notes

Courtesy of AUDI OF AMERICA, LLC

-- Use special caution when removing the dual clutch from the packaging.

• Do not remove or lift the clutch pack, not even a small amount. The clutch plates can rotate themselves.
• If the drive plate comes out of the outer clutch plate carrier teeth, the plates can slip. The dual clutch can then no longer be adjusted correctly.
• To ensure that the multiplate clutch plates do not slip, press the drive plate into the outer clutch plate carrier with both thumbs during all of the following steps.

-- Check on the bottom of the dual clutch if the four hub seals are seated correctly and engage them in one another if necessary.

Courtesy of AUDI OF AMERICA, LLC

• Installation position: the ends of the rings are offset to each other.