Upper Coolant Pipe, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the ignition coil with power output stage for cylinder "3". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
-- Release the retainers in direction of -arrows- and remove wiring duct -1- from bracket.
-- Clamp off the coolant hoses -arrows- with the :3094 .
-- Loosen the clamps and remove the coolant hoses.
-- Remove the bolts -1- and remove the upper coolant pipe.