Sealing Flange, Removing And Installing, Transmission Side: Removing
WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to TRANSMISSION, REMOVING [0GC] , or TRANSMISSION, REMOVING [0D9 .
-- Remove the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .
-- Disengage the sealing flange on the alignment sleeves and on the sealing flange -arrows-.
-- Remove the bolts -1 through 8-. (There is also equipment with only six bolts depending on the version).
-- Loosen the sealing flange from the bond and then remove it.