Overview - Fender
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 4.5 Nm
- Quantity: 2
- Mount
- For the bumper cover
- To secure the headlamp
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
- Fender
- Removing and Installing. Refer to FENDER, REMOVING AND INSTALLING .
- Repair kit. Refer to OVERVIEW - FENDER REPAIR KIT .
- Bolt
- Tightening specification. Refer to HEADLAMPS .
- Mount
- For headlamp
- Bolt
- 8 Nm
- Quantity: 2
- Lower Bracket
- For the fender
- Removing and Installing. Refer to FENDER BRACE, REMOVING AND INSTALLING .
- Seal
- Self-adhesive inside on the fender
- Bolt
- 8 Nm
- Quantity: 3
- Bolt
- 8 Nm
- Expanding Rivet
- Quantity: 2
- Bolt
- 8 Nm
- Quantity: 2
- Bolt
- 8 Nm
- Quantity: 2
- End Panel
- Removing and Installing. Refer to END PANEL, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Quantity: 2