Ribbed Belt, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation -1-. Refer to NOISE INSULATION .
CAUTION:
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
-- Pivot the tensioner counter clockwise with a wrench in direction of -arrow- to release the tension on the ribbed belt.
-- Secure the tensioning system using the :T10060A .
-- Remove the ribbed belt.