LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (CRANKSHAFT, CYLINDER BLOCK (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Crankshaft Needle Bearing, Replacing >> Notes

Crankshaft Needle Bearing, Replacing: Notes

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Only for vehicles equipped with a DSG transmission

Special tools and workshop equipment required 

NOTE:

Vehicles with a manual transmission do not have a needle bearing inside the crankshaft.

Vehicles with a dual-clutch transmission must have a needle bearing inside the crankshaft. Refer to the Parts Catalog.

Check the needle bearing for damage and if necessary replace the needle bearing.