LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (DIESEL FUEL INJECTION (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 23 Diesel Fuel Injection >> Sensors >> Fuel Temperature Sensor -G81-, Removing And Installing >> Installing >> Tightening Specification

Tightening Specification

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Perform a leak test on the fuel system. Refer to FUEL SYSTEM LEAK TEST .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .