High Pressure Line Between High Pressure Reservoir (Rail) And High Pressure Pump, Removing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
- Follow the guidelines for clean working conditions when working on the fuel supply system. Refer to CLEAN WORKING CONDITIONS .
-- Remove any dirt from the sealing cone on the high pressure reservoir.
-- Clean the fuel line and line connection with detergent and dry it with compressed air.
-- Remove the bolt -1-.
-- Remove the union nuts -arrows- and then remove the high pressure line.
CAUTION:
Danger Of Malfunction Caused By Dirt.
- Observe. Refer to CLEAN WORKING CONDITIONS .
Install the high pressure line. Refer to HIGH PRESSURE LINE, INSTALLING .