Parking Aid Control Module -J446-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- If equipped, release the retainer -2- in direction of -arrow- and remove the cover -1- downward.
-- Disconnect the connectors -1 and 2- by pressing the tab, turning the retaining bracket and disconnecting the connector.
-- Release the tab -arrow- and remove the control module -3- downward from the bracket.