High-Mounted Brake Lamp Bulb -M25-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install In The Reverse Order Of Removal. Note The Following:
NOTE:
If LED's are malfunctioning, high-mount brake light must be completely replaced.
Install In The Reverse Order Of Removal. Note The Following:
NOTE:
The entire high-mounted brake lamp must be replaced in the event of faulty LEDs.
-- The mount -2- for the high-mounted brake lamp -3- must engage evenly at the left and right in the guide rails -1-.
-- Slide the high-mounted brake lamp evenly forward in the direction of travel without tilting it until it engages audibly -arrows-.
Install In The Reverse Order Of Removal. Note The Following:
NOTE:
If LED's are malfunctioning, high-mount brake light must be completely replaced.