CONTROL VALVE FOR Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal while noting the following:

• Replace the O-ring after removal.

-- Install the noise insulation -1-. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Install the upper toothed belt guard. Refer to UPPER TOOTHED BELT GUARD, REMOVING AND INSTALLING .

-- After replacing or removing and installing the camshaft adjuster, perform the necessary adaptations using the Vehicle Diagnostic Tester and refer to PERFORM ADAPTATIONS AFTER COMPONENT REPLACEMENT .