Overview - Timing Mechanism Drive Chain
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Guide Rail
- Bolt
- 17 Nm + 90°
- Always replace
- Bolt
- Tightening specification -Item 5- OVERVIEW - CAMSHAFT TIMING CHAINS.
- Bolts
- Tightening specification -Item 13- OVERVIEW - CAMSHAFT TIMING CHAINS.
- Mounting Pin
- Left camshaft timing chain drive sprocket
- Drive Chain Sprocket
- For the left camshaft control chain
- Bolt
- Tightening specification -Item 10- OVERVIEW - CAMSHAFT TIMING CHAINS.
- Bearing Plate
- Left camshaft timing chain drive sprocket
- Asymmetrical version
- Drive Chain
- For timing mechanism
- Before removing, mark the direction of rotation with paint
- Removing and installing. Refer to TIMING MECHANISM DRIVE CHAIN, REMOVING AND INSTALLING .
- Guide Rail
- Bolt
- 17 Nm + 90°
- Always replace
- Thrust Washer
- Asymmetrical version
- Installed position. Refer to 12
- Drive Chain Sprocket
- For the right camshaft timing chain
- Mounting Pin
- For the right camshaft timing chain drive sprocket
- Asymmetrical version
- Installed position. Refer to 12
- Seal
- Always replace
- Chain Tensioner
- Bolt
- 5 Nm + 90°
- Always replace
- Crankshaft