ATF On Rear Final Drive 0BF And 0BE, Draining
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Drip Tray
- Overview of the ATF sealing plugs. Refer to OVERVIEW - DRAIN AND INSPECTION PLUG FOR ATF AND GEAR OIL, REAR FINAL DRIVE 0BF AND 0BE .
Rear Final Drive 0BF
-- Remove the ATF check plug -arrow- so that the ATF drains faster.
-- Remove the ATF drain plug -arrow- and drain the ATF.
-- Install the new ATF drain plug -arrow- and tighten. Tightening specification -item 15- OVERVIEW - REAR FINAL DRIVE.
Rear Final Drive 0BE
-- Remove the ATF check plug -1- so that the ATF drains faster out of the drain hole.
-- Remove the ATF drain plug -2- and drain the ATF.
-- Install the new ATF drain plug -2- and tighten. Tightening specification -item 15- OVERVIEW - REAR FINAL DRIVE.
Continuation for All Rear Final Drives
-- Fill with ATF in the rear final drive. Refer to ATF ON REAR FINAL DRIVE 0BF AND 0BE, FILLING .