Driveshaft, Removing And Installing From Rear Final Drive: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Kit - Multiple Use :T10172
- Counterhold - Kit - Adapter 5 :T10172/5 (M8 Bolts)
- Counterhold - Kit - Adapter 6 :T10172/6 (M10 Bolts)
- High Temperature Grease :G 000 633
- Pay attention to the notes. .
- A two-column shop hoist should be used when working on the driveshaft.