Right Cylinder Head Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the ignition coils, refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
-- Remove the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
CAUTION:
Risk of violating emissions legislation on USA vehicles.
- Do not open the hose connection -arrow-.
-- Remove the bolts in the following sequence -12 through 1- and lay the right cylinder head aside with the crankcase ventilation hose -arrow- connected.