LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> RS 7 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Exterior - Bumpers >> 63 Bumpers >> Rear Bumper >> Impact Member, Removing And Installing >> Impact Member, Removing And Installing, Vehicles Without Trailer Hitch, Audi A7/S7 >> Removing

Impact Member, Removing And Installing, Vehicles Without Trailer Hitch, Audi A7/S7: Removing

Fig 1: Identifying Nuts, Bolts And Impact Member
GWWA63-10462Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear bumper cover. Refer to REMOVING .

-- If equipped, remove the bass speaker. Refer to LEFT/RIGHT REAR BASS SPEAKER - R15- / - R17-, REMOVING AND INSTALLING .

-- Remove the nut -2- and bolts -1, 4 and 5-.

-- Remove the impact member -3-.