LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> RS 7 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Exterior - Bumpers >> 63 Bumpers >> Rear Bumper >> Cable Mount, Removing And Installing >> Removing

Cable Mount, Removing And Installing: Removing

-- Remove the luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .

-- Pull the pull knob -6- on the mount -3- and pry off the clamp -5- with a narrow screwdriver -arrow-.

-- Remove the cable -4- from the pull knob.

-- Remove the bolts -1, 2 and 7-.

-- Remove the cable bracket -1- from the mount -3- -arrow-.

Fig 1: Removing Cable Bracket From Mount
GWWA63-10490Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2- and remove the mount.