Bumper Cover, Removing And Installing, Vehicles Through MY 2014: Installing

• Gap dimensions. Refer to BUMPER COVER GAP DIMENSION .
• Tightening specifications. Refer to OVERVIEW - BUMPER COVER .

Install in reverse order of removal. Note the following:

-- Connect electrical harness connectors.

-- Install the cable mount. Refer to Installing .

-- Install the outer tail lamps. Refer to OUTER TAIL LAMPS .

-- If the vehicle has lane change assistance, the lane change assistance control module -J769- / -J770- must be recalibrated. Refer to LANE CHANGE ASSISTANCE CONTROL MODULES -J769- / -J770-, CALIBRATING .