LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> RS 7 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Exterior - Bumpers >> 63 Bumpers >> Rear Bumper >> Attachments, Removing And Installing >> Tail Pipe Trim Mount, Removing And Installing, From MY 2015 >> Removing

Tail Pipe Trim Mount, Removing And Installing, From MY 2015: Removing

Fig 1: Identifying Mount And Bolts
GWWA63-10969Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear bumper cover. Refer to REMOVING .

-- Remove the bolts -arrows-.

-- Remove the mount -1- from the bumper cover.