Tail Pipe Trim Mount, Removing And Installing, Audi RS7: Removing

Fig 1: Identifying Connectors

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear bumper cover. Refer to REMOVING .

-- Right: for vehicles with an automatic rear lid opener, disconnect connectors -2 and 3-

-- Free up the wiring harness -1- -arrows-.

-- Remove the clips -arrows- from the guide with a screwdriver.

Fig 2: Identifying Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1, 2 and 4-.

-- Remove the mount -3- from the bumper cover.