Overview - Bumper Cover, Audi A7/S7 Through MY 2014

Fig 1: Identifying Bumper Cover Overview - Audi A7/S7 Through MY 2014

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • 2 Nm
   • Quantity: 3
2. Spoiler Lower Section
   • Removing and installing. Refer to SPOILER LOWER SECTION, REMOVING AND INSTALLING, AUDI S7 .
3. Bolt
   • 2 Nm
   • Quantity: 6
4. Molded Foam Piece
   • Removing and installing. Refer to MOLDED FOAM PIECE, REMOVING AND INSTALLING, AUDI A7/S7 THROUGH MY 2014 .
5. Reinforcement Brace
   • Removing and installing. Refer to REINFORCEMENT BRACE, REMOVING AND INSTALLING .
6. Bolt
   • 1.5 Nm
   • Quantity: 6
7. Mount
   • For the Night Vision System Camera -R212-
   • Removing and installing. Refer to NIGHT VISION SYSTEM CAMERA -R212- MOUNT, REMOVING AND INSTALLING .
8. Bolt
   • 6 Nm
   • Quantity: 4
9. Bolt
   • 4 Nm
   • Quantity: 2
10. Front Bumper Cover Mount
    • Removing and installing. Refer to FRONT BUMPER COVER MOUNT, REMOVING AND INSTALLING .
11. Bolt
    • 4 Nm
    • Quantity: 2
12. Bolt
    • 1.5 Nm
13. Bumper Cover
    • Removing and installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
14. Bolt
    • Tightening specification. Refer to DISTANCE REGULATION CONTROL MODULE - J428- / DISTANCE REGULATION CONTROL MODULE 2 - J850-, REMOVING AND INSTALLING .
15. Distance Regulation Control Module (ACC)
    • Removing and Installing. Refer to DISTANCE REGULATION CONTROL MODULE - J428- / DISTANCE REGULATION CONTROL MODULE 2 - J850-, REMOVING AND INSTALLING .
16. Spray Nozzle Cover
    • For the headlamp washer system
    • Removing and installing. Refer to HEADLAMP WASHER SYSTEM SPRAY NOZZLE COVER, REMOVING AND INSTALLING .