Overview - Bumper Cover, Audi A7/S7 From MY 2015

Fig 1: Identifying Bumper Cover Overview - Audi A7/S7 From MY 2015

Courtesy of AUDI OF AMERICA, LLC

1. Spray Nozzle Cover
   • For the headlamp washer system
   • Removing and installing. Refer to HEADLAMP WASHER SYSTEM SPRAY NOZZLE COVER, REMOVING AND INSTALLING .
2. Bumper Cover
   • Removing and installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
3. Night Vision System Camera -R212-
   • Removing and Installing. Refer to NIGHT VISION SYSTEM CAMERA, REMOVING AND INSTALLING
4. Bolt
   • Quantity: 4
   • Tightening specification. Refer to NIGHT VISION SYSTEM CAMERA, REMOVING AND INSTALLING
5. Molded Foam Piece
   • Removing and installing. Refer to MOLDED FOAM PIECE, REMOVING AND INSTALLING, AUDI A7/S7 FROM MY 2015 .
6. Front Bumper Cover Mount
   • Removing and installing. Refer to FRONT BUMPER COVER MOUNT, REMOVING AND INSTALLING .
7. Bolt
   • 4 Nm
   • Quantity: 2
8. Bolt
   • 1.5 Nm
9. Bolt
   • Tightening specification. Refer to DISTANCE REGULATION CONTROL MODULE - J428- / DISTANCE REGULATION CONTROL MODULE 2 - J850-, REMOVING AND INSTALLING .
10. Distance Regulation Control Module (ACC)
    • Removing and Installing. Refer to DISTANCE REGULATION CONTROL MODULE - J428- / DISTANCE REGULATION CONTROL MODULE 2 - J850-, REMOVING AND INSTALLING .