Molded Foam Piece Mount, Removing And Installing, Audi RS7: Removing

Fig 1: Identifying Molded Foam Part Mount

Courtesy of AUDI OF AMERICA, LLC

-- Remove the license plate.

-- Remove screws -2- and -3- on the license plate holder -1-.

-- Remove the molded foam part. Refer to Removing .

-- Remove the bolts -arrows-.

Fig 2: Removing Mount

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the center reinforcement brace just enough so that the mount can be removed downward. Refer to Removing .

-- Remove the mount -1-.