Headlamp Cover, Removing And Installing: Installing

Fig 1: Identifying Cover, Lock Carrier Cover, Mounts, Sealing Lip, Fender And Seal

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Mount the cover -3- on the headlamp and on the lock carrier cover -1-.

• The mounts -2 and 7- must fit into the guides on the lock carrier cover and body -8-.
• The sealing lip -4- may not slide under the fender -5-. If necessary, push the seal -6- behind the fender.

-- Push the cover until it until it clicks into place.