Front Bumper Cover Mount, Removing And Installing: Installing

Fig 1: Pressing Front Bumper Cover Mount Against Headlamp Housing

Courtesy of AUDI OF AMERICA, LLC

• Gap dimensions. Refer to BUMPER COVER GAP DIMENSION .
• Tightening specifications. Refer to OVERVIEW - BUMPER COVER .

Install in reverse order of removal. Note the following:

-- Press the front bumper cover mount -3- against the headlamp housing -2- -arrow-, hold it in this position and then tighten the bolt -1-.

• The rib -4- on the mount must touch the headlamp housing.

-- Install the front bumper cover. Refer to Installing .