Fastener Tightening Specifications
WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Fastener Size | Nm |
|---|---|---|
| Charge Air Pressure Sensor | - | 5 |
| Charge Air Cooler Mount Bolt | - | 10 |
| Charge Air Pipe Bolt | - | 10 |
| Connecting Pipe to Exhaust Manifold Nut2 | - | 20 |
| Control Line/Heat Shield to Exhaust Manifold Stud Nut | - | 23 |
| Control Line Fittings | - | 23 |
| Exhaust Gas Recirculation Filter to Stud Bolt Nut | - | 23 |
| Exhaust Gas Temperature Sensor 1 | - | 45 |
| Intake Scoop to Turbocharger Bolt | - | 8 |
| Oil Return Line | - | 15 |
| Oil Supply Line Clamps | - | 10 |
| Oil Supply Line Fittings | - | 22 |
| Turbocharger Brace to Cylinder Block Banjo Bolt1 | - | 60 |
| Turbocharger/Exhaust Manifold to Cylinder Head Nut1, 2 | - | 23 |
| Turbocharger to Particulate Filter Clamp1 | - | 7 |
| Turbocharger Support to Stud Bolt | - | 20 |
| Warm Air Collector Plate | - | 8 |
|
||