LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> RS 5 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 721 (2.0L - Turbocharger & Supercharger - Engine Code(S): CJAA & CVCA (Hatchback)) >> 21 Turbocharger, Supercharger >> Diagnosis And Testing >> Charge Air System, Checking For Leaks >> Assembling

Charge Air System, Checking For Leaks: Assembling

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is performed in reverse order. Note the following:

NOTE:

Replace the gasket and O-ring.

The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.

Secure the hose connections with standard production clamps.

-- Install the intake tube and pulsation damper, refer to TURBOCHARGER OVERVIEW .

-- Install the air duct hoses and screw-type clamps CHARGE AIR HOSE CONNECTIONS .