Special Tools

Special tools and workshop equipment required 

• Straight Edge 500 mm VAS 6075
• Compression Tester V.A.G 1763 with Adapter V.A.G 1763/6
• Torque Wrench (40-200 Nm) V.A.G 1332
• Shop Crane - Load Cap = 700-1200 KG VAS 6100
• Engine Bung Set VAS 6122
• Drip Tray for VAS 6100 VAS 6208
• Polydrive Bit and Drive Socket T10070
• Thrust Piece T10368
• Locking Pin T10060 A
• Thrust Piece T10174
• Spark Plug Removal Tool 3122 B
• Valve Seal Removal Tool 3364
• Valve Stem Seal Driver 3365
• Adapter T40012
• Valve Cotters Asm/Disasm Device VAS 5161
• Guide Plate for FSI Engine VAS 5161/19B
• Dial Gauge 0-10 mm VAS 6079
  Fig 1: Identifying Dial Gauge 0-10 mm VAS 6079

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Dial Gauge Adapter T10170 or T10170 A
  Fig 2: Identifying Dial Gauge Adapter

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Torque Wrench (5-50 Nm) V.A.G 1331
  Fig 3: Identifying Torque Wrench (5 To 50 Nm) V.A.G 1331

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Torque Wrench V.A.G 1783
  Fig 4: Identifying Torque Wrench (2 to 10 Nm) VAG 1783

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Open End Spanner Insert AF 10 V.A.G 1783/1
  Fig 5: Identifying V.A.G 1783/1

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Bits T10099
  Fig 6: Identifying Bits T10099

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 7: Identifying Engine Sling 2024 A And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Engine Sling 2024 A
• Engine Support T10014
• Assembly Tool T10352
• Counter Hold Tool T10355
• Locking Pin T40011
• Ignition Coil Puller T40039

Fig 8: Identifying Special Tools -- Camshaft Timing Chain (With New Tools)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Central Valve Assembly Tool T10352
• Counterhold - Vibration Damper T10355
• Locking Pin T40011
• Chain Tensioner Lever T40243
• Tensioner Locking Tool T40267
• Camshaft Locks T40271