Cylinder Head: Notes
WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Sling 2024 A
- Engine Support T10014
- Assembly Tool T10352
- Counter Hold Tool T10355
- Locking Pin T40011
- Ignition Coil Puller T40039
- Torque Wrench (5-50 Nm) V.A.G 1331
- Torque Wrench (40-200 Nm) V.A.G 1332
- Shop Crane - Load Cap = 700-1200 KG VAS 6100
- Engine Bung Set VAS 6122
- Drip Tray for VAS 6100 VAS 6208
- Polydrive Bit and Drive Socket T10070
- Cable Ties