Test Sequence
WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Follow all safety precautions. Refer to SAFETY PRECAUTIONS
.
-- Remove the ignition coils with the power output stages. Refer to IGNITION COILS WITH POWER OUTPUT STAGES .
-- Remove the spark plugs using the spark plug removal tool 3122 B.
-- Check the compression using the compression tester V.A.G 1763 and the adapter V.A.G 1763/6.
NOTE:
Using the tester, refer to the operating instructions.
-- Activate the starter until no further pressure increases are indicated by the tester.