LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> RS 5 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 572 (1.8L & 2.0L - Exhaust System, Emission Controls - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 26 Exhaust System, Emission Controls >> Removal And Installation >> Rear Muffler >> Rear Muffler, Twist Beam Suspension >> Separating

Rear Muffler, Twist Beam Suspension: Separating

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Separating Point
GWWM26-10015Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
WARNING: To prevent injuries from metal shavings, wear protective goggles and protective clothing.

-- Cut the exhaust pipe at a right angle at the separating point -arrow 1-, for example using a Body Saw VAG1523B or Chain Pipe Cutter VAS6254.