Accelerator Pedal Module -GX2-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the steering column cover -arrows-.

Fig 1: Identifying Steering Column Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry off the cap -3- using a screwdriver.

Fig 2: Accelerator Pedal Module, Connector, Cap, Bolt, Retaining Pins & Centering Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove bolts -2-.

-- Remove the connector -1-.

-- Insert the Accelerator Pedal Module Release Tool T10238 / Release Tool T10240 all the way into the opening provided, as illustrated.

Fig 3: Identifying Release Tool T10238

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the accelerator pedal module.