Overview - Seat Position Sensor
NOTE:
The illustration shows the passenger seat position sensor with the wiring harness.
- Connector
- Connector station in the vehicle floor under on the sill panel under the seat.
- Cable Holder/Cable Tie
- Clipped in the seat frame.
- Connector
- for the belt latch
- Cable Holder/Cable Tie
- Clipped in the seat frame.
- Seat rail
- Tunnel side
- Front Passenger Seat Position Sensor -G554-
- Driver seat: Driver Seat Position Sensor -G553-
- Removing and installing. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING .
- Bolt
- 1.2 Nm
- Connector
- Only for passenger seat: for Passenger Occupant Detection System Control Module -J706-