Rear Seat Belt Guide, Removing And Installing: Removing
- Do not rotate bolts -2- under any circumstances when removing and installing belt guide -3-. They are set by the manufacturer.
- Replace the entire belt guide if damaged.
-- Versions with a side cushion: remove the side cushion. Refer to REAR SIDE PADDING WITH SIDE AIRBAG, REMOVING AND INSTALLING .
-- Remove the rear sill trim. Refer to REAR SILL PANEL STRIP, REMOVING AND INSTALLING .
-- Remove the luggage compartment side trim. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the cover from the seat belt guide Refer to SEAT BELT GUIDE COVER, REMOVING AND INSTALLING .
-- Push the belt guide retaining hook -1- upward and hold it there.
-- Slide the belt guide -arrow- back until the bolt heads -2- can be disengaged from the console on the body.
-- Remove the seat belt guide -3- sideways from the vehicle interior.
-- Rear outer right seat belt guide: Disconnect the connector from the Rear Parking Aid Warning Buzzer -H15-.
-- Thread out the belt and remove the belt guide.