LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> Q3 Prestige >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Passenger Protection, Airbags & Seat Belts >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Front Three-Point Seat Belt, Removing And Installing >> Front Belt TENSIONER, Removing And Installing, USA And CANADA Market-Specific >> Installing

Front Belt TENSIONER, Removing And Installing, USA And CANADA Market-Specific: Installing

WARNING:
  • Follow all safety precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

Install in reverse order of removal. Note the following:

-- If parts of the seat belt system are removed due to an accident, replace the belt system bolts.

NOTE:

Make sure the connectors are installed correctly and are secure.

WARNING:

Ignition must be on when connecting battery. If pyrotechnic components (for example, airbag, belt tensioner) are not repaired correctly, they may deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the battery.

-- Connect the battery ground cable with the ignition turned on.

scientia non olet · About LEMON Manuals