Airbag Connector, Replacing: Removing
Follow all safety precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
-- Remove the driver side airbag. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
Vehicles with a 3-spoke steering wheel:
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Release the retaining tabs in order to disconnect the connectors -1-, -2-, -4- and -6-.
-- Disconnect the connector -3- from the adapter and -5- for the Driver Airbag Igniter -N95-.
-- To do so, release the connector lock -2- with a small screwdriver -arrow- and disconnect the connector -1-.
-- Disengage and remove the wiring harness from the brackets.
Versions with 4-spoke Steering Wheel:
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Release the retaining tabs in order to disconnect the connectors -1-, -2-, -4- and -6-.
-- Disconnect the connector -3- from the adapter and -5- for the Driver Airbag Igniter -N95-.
-- To do so, release the connector lock -2- with a small screwdriver -arrow- and disconnect the connector -1-.
-- Disengage and remove the wiring harness from the brackets.