Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Remove the bolt -2- and then remove the Camshaft Position Sensor 3 -G300-.