Sealing Flange, Removing And Installing, Transmission Side: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to TRANSMISSION, REMOVING AND INSTALLING .
-- Remove the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .
-- Disengage the sealing flange on the alignment sleeves and on the sealing flange -arrows-.
-- Remove the bolts -1 through 8-. (There is also equipment with only six bolts depending on the version).
-- Loosen the sealing flange from the bond and then remove it.