Flywheel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to TRANSMISSION, REMOVING AND INSTALLING .
CAUTION:
- Never remove the bolts with an air or impact wrench.
- When removing the bolts, make sure that the bolt head does not come in contact with the flywheel.
-- Turn the flywheel -A- so that the bolts -B- line up with the center of the holes -arrows-.
-- Place the :3067 into the hole on the cylinder block -item B-.
-- Loosen and remove the bolts for the flywheel.