Ribbed Belt, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to Noise Insulation, Removing And Installing .
CAUTION:
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
-- Mark the running direction using chalk or a felt-tip pen.
-- Turn the tensioner in direction of -arrow- to release the tension on the ribbed belt.
-- Secure the tensioner using the :T10060A .
-- Remove the ribbed belt.