LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> Q3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Crankshaft & Cylinder Block (Ea 888 Generation III) (2017-2018)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Installing

Ribbed Belt TENSIONER, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

There are additional procedures depending on the model. .

scientia non olet · About LEMON Manuals